Follow
Visit our Product Catalog . . . View Catalog
  • All
  • Gypsum
  • Other
  • Putty
  • Default
  • Title
  • Date
  • Random
  • lightweight, high strength and resistance to impact 

    Acoustic and thermal insulation 

    Use on all types of building materials 

    Read More
    • Gypsum
  • Increase speed up to 5 times faster in plastering 

    Heat and humidity insulation 

    Convenience and saving time and money 

    Read More
    • Gypsum
  • Insulating plaster with a long setting time 

    Acoustic and thermal insulation 

    No cracking and high- speed and convenience 

    Read More
    • Gypsum
  • Best infrastructure before painting and Wallpaper 

    Fill cracks and crevices of the wall 

    Prevent the penumbra </p

    Read More
    • Putty
  • New product 

    High Quality 

    Very easy to use user interface

    Read More
    • Other
  •  

    New product 

    High Quality 

    Very easy to use user interface 

    Read More
    • Other

شرکت سارینا گچ البرز - Sarinagips Co.

painting putty

 Sarina painting putty is used to obtain a smooth and even surface before the application of wall finishing such as paint and  wall paper.

Preparation of the mortar

 ·         55.0 It. water is added to 10 kg. sarina painting gypsum putty.

 ·         Put firstly water in a clean container then sprinkle SARINA until it covers the water surface.

  ·         Wait a few minutes for submerging of surface plaster and then mix the mortar.

 ·         The mortar application on the wall should be done by Palette knife.

 ·         The mortar can be used easily for approximately 1 hour.

Storage conditions

 The bags should be stored in a dry place, stacked on pallets, away from water and humidity.

Sarina Makina Siva

Characteristics and application areas :

Sarina Makina Siva is a gypsum plaster applied by spray machine which is used for plastering of various kinds of construction materials such as bricks, cement blocks, light cement blocks and concrete covered surfaces.

Main advantage of using Makina Siva spray gypsum is its fast implementation(4 to 5 times more hand applied gypsums), beside this, by using perlite and polymer based compounds in this production, it has advantages of long setting time, light weight, and more sound and heat proof resistance in comparison to ordinary gypsum (for obtaining a smooth finish layer, saten gypsum should be used as the finishing layer).

Preparation of Mortar and instructions:

Fill the container of gypsum spray machine with gypsum and water in ratio of 20 liter of water per each 30 kg bag of gypsum .after mixing of the material by the machine, spray the mixture on the wall and level it after 15 minutes. 1 hour later, moisture the surface with a sponge trowel and finish it with a aluminum or steel trowel.

§  Surface of the gypsum application area and also tools surface must be clean (dust, oil and small particles should be removed from surface of the work).

§  It’s better that surface of the work is moisture with water before application.

Usage amount per each 1 cm thickness: 10 kg/m2 ( usual thickness of the plastering is between 1-2.5 cm, according to the surface material .( if necessary to work more than 1 cm thickness , it’s better to work the 2nd layer in the day after ).

Proper temperature during application: between 5 to 35 C.

Proper humidity during the application: 50% – 60%.

Initial setting time : 50-60 minutes

Secondary setting time:  150-180 Minutes (so the user has enough time to process finishing).

Normal thickness of applying is : between 1 to 2 cm.

Storage conditions: the bags should be stored in a dry place on pallets away from water and humidity.

Shelf life: 6 months from the date of production. It is recommended to use within one week after opening the bag.

Sarina Siva

Characteristics and application areas :

Sarina Siva is a hand applied gypsum plaster which is used for first layer of plastering for various kinds of construction materials such as bricks, cement blocks, and concrete covered surfaces.

By using perlite and polymer based compounds in this product , it has advantages of long setting time, lightweight, and more sound and heat proof resistance in comparison to ordinary gypsums.(for obtaining a smooth finish, saten gypsum should be used as the finishing layer).

Preparation of Mortar :

Fill a clean container with 18-20 liter water for each 30 kg bag of the product . then pure the gypsum in the water slowly until covering the surface of the water . wait for 2-3 minutes for floating gypsum to sink by soaking .Mix water and gypsum at a low speed by a mechanical mixer until a proper mixture is obtained. 

Instructions:

§  Surface of the gypsum application area and also tools surface must be clean ( dust, oil and small particles should be removed from surface of the work ).

§  It is better to have a good balance of work and holes and bumps made ​​possible by the work surface.

§  It’s better that surface of the work is moisture with water before application.

Usage amount per each 1 cm thickness : 8 – 9 kg/m2 ( thickness of the plastering must be at least 1 Cm , if necessary to work more than 1 cm thickness , it’s better to work the 2nd layer in the day after ).

Proper temperature during application : between 5 to 35 C.

 

Proper humidity during the application : 50% – 60%.

 

Initial setting time : 40 – 50 minutes.

 

Secondary setting time : 120-150 Minutes (so the user has enough time to process finishing).

 

Normal thickness of applying is : between 1 to 2.5 cm.

 

Storage conditions : the bags should be stored in a dry place on pallets away from water and humidity.

 

Shelf life: 6 months from the date of production . It is recommended to use within one week after opening the bag .

 

 

Sarina Saten

Characteristics and application areas :

Sarina Saten is a finishing layer gypsum plaster which is used as last layer after siva gypsum application.

By using micronized gypsum powder and polymer based compounds in this product, it has advantages of long setting time and very bright coverage in comparison with ordinary gypsums.

Preparation of Mortar :

Fill a clean container with 18-20 liter water for each 30 kg bag of the product . then pure the gypsum in the water slowly until covering the surface of the water . wait for 2-3 minutes for floating gypsum to sink by soaking .Mix water and gypsum at a low speed by a mechanical mixer until a proper mixture is obtained.

Instructions:

§  Surface of the gypsum application area and also tools surface must be clean ( dust, oil and small particles should be removed from surface of the work ).

§  It is better to have a good balance of work and holes and bumps made ​​possible by the work surface.

Usage amount per each 1 square meter with 1-3 Millimeter thickness : 1-3 kg/m2

Proper temperature during application : between 5 to 35 C.

Proper humidity during the application : 50% – 60%.

Initial setting time : 90-100 minutes .

Secondary setting time : 180-210 minutes.(so the user has enough time to process finishing).

Normal thickness of applying : between 2 t0 3 mm, which makes it more efficient economically.

Storage conditions : the bags should be stored in a dry place on pallets away from water and humidity.

Shelf life: 6 months from the date of production . It is recommended to use within one week after opening the bag .